Projects/Ohm led strip sleeves: verschil tussen versies

Uit Hackerspace Amersfoort
Naar navigatie springen Naar zoeken springen
Rogue (overleg | bijdragen)
Rogue (overleg | bijdragen)
Geen bewerkingssamenvatting
Regel 20: Regel 20:
* 5m led strip rgb ws2812 30 leds/m
* 5m led strip rgb ws2812 30 leds/m
* wooden block jammed in the sleeve to support and keep the contents in the sleeve
* wooden block jammed in the sleeve to support and keep the contents in the sleeve


<gallery>
<gallery>
Regel 27: Regel 26:
</gallery>
</gallery>


== Main pages ==
=== Light control ===
 
The sleeves are controlled using ArtNet (DMX over UDP, [[http://www.artisticlicence.com/WebSiteMaster/User%20Guides/art-net.pdf link]]).
 
 
 
=== Main links ===
[[https://github.com/AlbertVos/bitlair-ohm2013-ledstrip-contol Python art and library]]
[[https://github.com/AlbertVos/bitlair-ohm2013-ledstrip-contol Python art and library]]


Regel 34: Regel 39:
[[https://github.com/bobo1on1/bobtricks Firmware]]
[[https://github.com/bobo1on1/bobtricks Firmware]]


== Other ==
=== Other links ===
[[https://github.com/ohm2013loc/art Ohm2013 art (Kat/Gavan)]]
[[https://github.com/ohm2013loc/art Ohm2013 art (Kat/Gavan)]]


[[http://tkkrlab.nl/wiki/OHM_LEDS Tkkrlab page]]
[[http://tkkrlab.nl/wiki/OHM_LEDS Tkkrlab page]]

Versie van 1 jun 2014 19:44


Project Ohm2013 led strip sleeves
Naam Ohm2013 led strip sleeves
Beschrijving Ohm2013 led strip sleeves
Website
Start 2013/01/01
Contact Rogue
Status Production


Description

For the Ohm2013 festival Bitlair created about 120 led strip sleeves to provide basic lighting on the field. These sleeves were hang on top of 6m scaffolding poles (dug into the ground about 1m).

Construction

Each sleeve consists of:

  • pipe (diameter 7cm, length 50cm)
  • cap to shut off the top of the pipe
  • laptop power converter (5V, 8A)
  • MiNi ENC28J60 Ethernet LAN Network Module For Arduino SPI AVR
  • custom controller board with Atmel Mega328
  • 5m led strip rgb ws2812 30 leds/m
  • wooden block jammed in the sleeve to support and keep the contents in the sleeve

Light control

The sleeves are controlled using ArtNet (DMX over UDP, [link]).


Main links

[Python art and library]

[Hardware design]

[Firmware]

Other links

[Ohm2013 art (Kat/Gavan)]

[Tkkrlab page]