Projects/LED-Banner: Difference between revisions
< Projects
(→TODO) |
(→TODO) |
||
| Line 13: | Line 13: | ||
* Cut holes in aluminium profile '''done''' | * Cut holes in aluminium profile '''done''' | ||
* Align and tiewrap LED-strips to cloth '''done!''' | * Align and tiewrap LED-strips to cloth '''done!''' | ||
** Polyfloyd designed and lasercut a custom 'straightener' to align. | |||
* Connect power supplies to led-strips | * Connect power supplies to led-strips '''wip''' | ||
* Create a controller | * Create a controller '''wip''' | ||
== Shoppinglist/BOI == | == Shoppinglist/BOI == | ||
Revision as of 20:03, 3 July 2016
 | |
|---|---|
| Project BitBanner (LED-banner) | |
| Name | BitBanner (LED-banner) |
| Start | 2015/03/13 |
| End | |
| Contact | Bobo1on1, Mro, Rogue, X6m, Polyfloyd, Juerd, Stijn |
| Website | |
| Information | A LED-banner consisting of 16 5 meter long 30 LEDs/meter strips. |
| Status | Production |
Bitlair's new incarnation of blinkenlights: the BitBanner.
The BitBanner will consist of 16 5 meter long RGB LED-strips, with 30 pixels per meter. They'll need 5V about 120 Amps. To provide power 24 V power supplies will be used along with 32 step down converters (4 per PCB, designed and created by Bobo1on1).
TODO
- Create stepdown power converters done
- Cut holes in aluminium profile done
- Align and tiewrap LED-strips to cloth done!
- Polyfloyd designed and lasercut a custom 'straightener' to align.
- Connect power supplies to led-strips wip
- Create a controller wip
Shoppinglist/BOI
- Drill holes in aluminium profile done
- Buy banner fabric done
- Buy 2000 cable ties done
- Buy bold / nut 100 * 3mm 15mm + rings 200 done
- Buy wire for connecting led strips (1 mm2 red/black 32*1m?)
- Buy wire for supplying power to pcb's () (2.5 mm2 red/black 12m)
POIDH
Sorting the LED-strips.
The BitBanner cloth.
Polyfloyd and his DIY LED-strip straightener.
Aligning the LED-strips.