Projects/LED-Banner: verschil tussen versies
< Projects
k formatting blah |
minor formatting |
||
| Regel 12: | Regel 12: | ||
* Create stepdown power converters '''done''' | * Create stepdown power converters '''done''' | ||
* Cut holes in aluminium profile '''done''' | * Cut holes in aluminium profile '''done''' | ||
* Align and tiewrap LED-strips to cloth | |||
== Shoppinglist/ | :: Roel designed and lasercut a custom 'straightener' to align. | ||
== Shoppinglist/BOI == | |||
* Drill holes in aluminium profile '''done''' | * Drill holes in aluminium profile '''done''' | ||
* Buy banner fabric '''done''' | * Buy banner fabric '''done''' | ||
Versie van 7 feb 2016 16:00
 | |
|---|---|
| Project BitBanner (LED-banner) | |
| Naam | BitBanner (LED-banner) |
| Beschrijving | A LED-banner consisting of 16 5 meter long 30 LEDs/meter strips. |
| Website | |
| Start | 2015/03/13 |
| Contact | Bobo1on1, Mro, Rogue, X6m, Polyfloyd |
| Status | Production |
Bitlair's new incarnation of blinkenlights: the BitBanner.
The BitBanner will consist of 16 5 meter long RGB LED-strips, with 30 pixels per meter. They'll need 5V about 120 Amps. To provide power 24 V power supplies will be used along with 32 step down converters (4 per PCB, designed and created by Bobo1on1).
TODO
- Create stepdown power converters done
- Cut holes in aluminium profile done
- Align and tiewrap LED-strips to cloth
- Roel designed and lasercut a custom 'straightener' to align.
Shoppinglist/BOI
- Drill holes in aluminium profile done
- Buy banner fabric done
- Buy 2000 cable ties done
- Buy wire for connecting led strips (1 mm2 red/black 32*1m?)
- Buy wire for supplying power to pcb's () (2.5 mm2 red/black 12m)
- Buy bold / nut 100 * 3mm 15mm + rings 200
POIDH
Sorting the LED-strips.
The BitBanner cloth.
Polyfloyd and his DIY LED-strip straightener.