Projects/bitmobile: verschil tussen versies
< Projects
Geen bewerkingssamenvatting |
Geen bewerkingssamenvatting |
||
| Regel 28: | Regel 28: | ||
* Raised chair for more space to work with building audio system | * Raised chair for more space to work with building audio system | ||
'''18/11/2014''' | '''18/11/2014''' | ||
* Kartoffel has | * Kartoffel has acquired programming software | ||
'''23/11/2014''' | '''23/11/2014''' | ||
* Success! We built a programming cable and were able to reprogram the motor controller. At this point we can change the acceleration and deceleration, but we haven't figured out how to increase the speed above 15km/h. | * Success! We built a programming cable and were able to reprogram the motor controller. At this point we can change the acceleration and deceleration, but we haven't figured out how to increase the speed above 15km/h. | ||
Versie van 24 nov 2014 13:35
 | |
|---|---|
| Project Bitmobile | |
| Naam | Bitmobile |
| Beschrijving | Reviving the scootmobile used at OHM2013. |
| Website | |
| Start | 2014/05/18 |
| Contact | Roel, Stijn, mattronix, KartoffelKönig, x6m |
| Status | Production |
Project description
See https://pad.bitlair.nl/p/bitmobile for ideas and planned modifications.
Project timeline
21/05/2014
- Replaced the 6.35mm jack plug 'ignition' with a barrel plug
- Accidentally fried part of the controller board, causing the turn signals to stop functioning
22/05/2014
- Sanded the plastic body parts in preparation of painting
25/05/2014
- Painted some plastic body parts
- Replaced barrel plug 'ignition' with electronical lock (with key)
- Planned box for holding speakers, subwoofer and amplifier
- Got sponsor for touch screen controlling audio system, BobLight 'n stuff
- Got sponsor for car batteries
- Painted rims to prevent any further rust
- Laser-cut spinners to put on the rims
28/05/2014
- Raised chair for more space to work with building audio system
18/11/2014
- Kartoffel has acquired programming software
23/11/2014
- Success! We built a programming cable and were able to reprogram the motor controller. At this point we can change the acceleration and deceleration, but we haven't figured out how to increase the speed above 15km/h.
Pictures
