Projects/bitmobile: verschil tussen versies
< Projects
Geen bewerkingssamenvatting |
Geen bewerkingssamenvatting |
||
| Regel 2: | Regel 2: | ||
|name=Bitmobile | |name=Bitmobile | ||
|start=2014/05/18 | |start=2014/05/18 | ||
|contact= | |contact=Stijn, | ||
|info=Reviving the scootmobile used at OHM2013. | |info=Reviving the scootmobile used at OHM2013. | ||
|status=Alpha | |status=Alpha | ||
| Regel 9: | Regel 9: | ||
See https://pad.bitlair.nl/p/bitmobile for ideas and planned modifications. | See https://pad.bitlair.nl/p/bitmobile for ideas and planned modifications. | ||
== TODO | |||
== TODO == | |||
* Power: fix the battery loader and maybe new batteries | |||
* Frame: Lasercut frame for on the back | |||
* | * | ||
== Project timeline == | == Project timeline == | ||
'''21/05/2014''' | '''21/05/2014''' | ||
| Regel 20: | Regel 24: | ||
* Painted some plastic body parts | * Painted some plastic body parts | ||
* Replaced barrel plug 'ignition' with electronical lock (with key) | * Replaced barrel plug 'ignition' with electronical lock (with key) | ||
* Painted rims to prevent any further rust | * Painted rims to prevent any further rust | ||
* Laser-cut spinners to put on the rims | * Laser-cut spinners to put on the rims | ||
'''18/11/2014''' | '''18/11/2014''' | ||
* Kartoffel has acquired programming software | * Kartoffel has acquired programming software | ||
Versie van 6 sep 2015 14:29
 | |
|---|---|
| Project Bitmobile | |
| Naam | Bitmobile |
| Beschrijving | Reviving the scootmobile used at OHM2013. |
| Website | |
| Start | 2014/05/18 |
| Contact | Stijn |
| Status | Alpha |
Project description
See https://pad.bitlair.nl/p/bitmobile for ideas and planned modifications.
TODO
- Power: fix the battery loader and maybe new batteries
- Frame: Lasercut frame for on the back
Project timeline
21/05/2014
- Replaced the 6.35mm jack plug 'ignition' with a barrel plug
- Accidentally fried part of the controller board, causing the turn signals to stop functioning
22/05/2014
- Sanded the plastic body parts in preparation of painting
25/05/2014
- Painted some plastic body parts
- Replaced barrel plug 'ignition' with electronical lock (with key)
- Painted rims to prevent any further rust
- Laser-cut spinners to put on the rims
18/11/2014
- Kartoffel has acquired programming software
23/11/2014
- Success! We built a programming cable and were able to reprogram the motor controller. At this point we can change the acceleration and deceleration, but we haven't figured out how to increase the speed above 15km/h.
Pictures
