Projects/LED-Banner: Difference between revisions

From Hackerspace Amersfoort
Jump to navigation Jump to search
(minor formatting)
(yes)
Line 12: Line 12:
* Create stepdown power converters '''done'''
* Create stepdown power converters '''done'''
* Cut holes in aluminium profile '''done'''
* Cut holes in aluminium profile '''done'''
* Align and tiewrap LED-strips to cloth
* Align and tiewrap LED-strips to cloth '''done!'''
* Connect power supplies to led-strips
* Create a controller (go Bob!)
:: Polyfloyd designed and lasercut a custom 'straightener' to align.
:: Polyfloyd designed and lasercut a custom 'straightener' to align.
== Shoppinglist/BOI ==
== Shoppinglist/BOI ==
Line 18: Line 20:
* Buy banner fabric '''done'''
* Buy banner fabric '''done'''
* Buy 2000 cable ties '''done'''
* Buy 2000 cable ties '''done'''
* Buy bold / nut 100 * 3mm 15mm + rings 200 '''done'''
* Buy wire for connecting led strips (1 mm2 red/black 32*1m?)
* Buy wire for connecting led strips (1 mm2 red/black 32*1m?)
* Buy wire for supplying power to pcb's () (2.5 mm2 red/black 12m)
* Buy wire for supplying power to pcb's () (2.5 mm2 red/black 12m)
* Buy bold / nut 100 * 3mm 15mm + rings 200


== POIDH ==
== POIDH ==

Revision as of 21:37, 10 February 2016


Project BitBanner (LED-banner)
Name BitBanner (LED-banner)
Start 2015/03/13
End
Contact Bobo1on1, Mro, Rogue, X6m, Polyfloyd, Juerd, Stijn
Website
Information A LED-banner consisting of 16 5 meter long 30 LEDs/meter strips.
Status Production


Bitlair's new incarnation of blinkenlights: the BitBanner. The BitBanner will consist of 16 5 meter long RGB LED-strips, with 30 pixels per meter. They'll need 5V about 120 Amps. To provide power 24 V power supplies will be used along with 32 step down converters (4 per PCB, designed and created by Bobo1on1).

TODO

  • Create stepdown power converters done
  • Cut holes in aluminium profile done
  • Align and tiewrap LED-strips to cloth done!
  • Connect power supplies to led-strips
  • Create a controller (go Bob!)
Polyfloyd designed and lasercut a custom 'straightener' to align.

Shoppinglist/BOI

  • Drill holes in aluminium profile done
  • Buy banner fabric done
  • Buy 2000 cable ties done
  • Buy bold / nut 100 * 3mm 15mm + rings 200 done
  • Buy wire for connecting led strips (1 mm2 red/black 32*1m?)
  • Buy wire for supplying power to pcb's () (2.5 mm2 red/black 12m)

POIDH

Sorting the LED-strips.

The BitBanner cloth.

Polyfloyd and his DIY LED-strip straightener.

Aligning the LED-strips.