Projects/LED-Banner: Difference between revisions

From Hackerspace Amersfoort
Jump to navigation Jump to search
(added more pictures)
No edit summary
Line 35: Line 35:
Polyfloyd and his DIY LED-strip straightener.
Polyfloyd and his DIY LED-strip straightener.


[[File:Bitbanner_aligning.jpg|200px]][[File:Bitbanner_aligning2.jpg|200px]]
[[File:Bitbanner_aligning.jpg|300px]] [[File:Bitbanner_aligning2.jpg|300px]]


Aligning the LED-strips.
Aligning the LED-strips.

Revision as of 16:08, 7 February 2016


Project BitBanner (LED-banner)
Name BitBanner (LED-banner)
Start 2015/03/13
End
Contact Bobo1on1, Mro, Rogue, X6m, Polyfloyd
Website
Information A LED-banner consisting of 16 5 meter long 30 LEDs/meter strips.
Status Production


Bitlair's new incarnation of blinkenlights: the BitBanner. The BitBanner will consist of 16 5 meter long RGB LED-strips, with 30 pixels per meter. They'll need 5V about 120 Amps. To provide power 24 V power supplies will be used along with 32 step down converters (4 per PCB, designed and created by Bobo1on1).

TODO

  • Create stepdown power converters done
  • Cut holes in aluminium profile done
  • Align and tiewrap LED-strips to cloth
Roel designed and lasercut a custom 'straightener' to align.

Shoppinglist/BOI

  • Drill holes in aluminium profile done
  • Buy banner fabric done
  • Buy 2000 cable ties done
  • Buy wire for connecting led strips (1 mm2 red/black 32*1m?)
  • Buy wire for supplying power to pcb's () (2.5 mm2 red/black 12m)
  • Buy bold / nut 100 * 3mm 15mm + rings 200

POIDH

Sorting the LED-strips.

The BitBanner cloth.

Polyfloyd and his DIY LED-strip straightener.

File:Bitbanner aligning2.jpg

Aligning the LED-strips.