Projects/bitmobile

From Hackerspace Amersfoort
Jump to navigation Jump to search


NoPicture.png
Project Bitmobile
Name Bitmobile
Start 2014/05/18
End 2016/08/01
Contact Stijn
Website
Information Reviving the scootmobile used at OHM2013.
Status Abandoned


Project description

See https://pad.bitlair.nl/p/bitmobile for ideas and planned modifications.

TODO

  • Power: fix the batteryloader and maybe new batteries

Either build or buy a batteryloader

  • Frame: lasercut backframe for on the back, mount batteryloader on the back

Design backframe Lasercut backframe

  • Cosmetics: spraypaint, mount LED strips and music system (amplifier+speakers)

Paint new backframe, spinners and underside of the frontpanel

  • Electronics: fix lights

Project timeline

21/05/2014

  • Replaced the 6.35mm jack plug 'ignition' with a barrel plug
  • Accidentally fried part of the controller board, causing the turn signals to stop functioning

22/05/2014

  • Sanded the plastic body parts in preparation of painting

25/05/2014

  • Painted some plastic body parts
  • Replaced barrel plug 'ignition' with electronical lock (with key)
  • Painted rims to prevent any further rust
  • Laser-cut spinners to put on the rims

18/11/2014

  • Kartoffel has acquired programming software

23/11/2014

  • Success! We built a programming cable and were able to reprogram the motor controller. At this point we can change the acceleration and deceleration, but we haven't figured out how to increase the speed above 15km/h.


Pictures

Dimitri painting.jpg Mobile audio.jpg Spinner2.jpg Spinner1.jpg Mobile painted.jpg

External links